To Next PageTo Next PageWhat to do if there is water leakage from the boiler of my Bosch Iron?
If there is water leakage from the boiler of your Bosch Iron, the scale collector located at the side of the appliance may be loose. Tighten up the scale collector.
Why do water spots appear on the garment during ironing with my Bosch Sensixx B22L?
Water spots may appear on the garment during ironing with your Bosch Iron because of steam condensed on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
What should I do if there's water leakage from the filter located at the side of my Bosch Sensixx B22L?
Tighten up the filter.
What to do if water spots appear when using the “PulseSteam” function on my Bosch Sensixx B22L?
If water spots appear on the garment during use of the “PulseSteam” function on your Bosch Iron, it is because water spots are caused by steam condensation in the hose when cooling down after use. Water drops stop coming out of the soleplate after using the “PulseSteam” function for some time.
What to do if water spots appear on the garment during ironing with my Bosch Iron?
If water spots appear on the garment during ironing with your Bosch Iron, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board, and iron any water drops to dry them.
What to do if water flows through the holes on the soleplate of my Bosch Iron?
If water flows through the holes on the soleplate of your Bosch Iron, it could be due to several reasons. One reason is that the steam function is being used before the iron has reached the correct temperature; in this case, reduce the steam flow when ironing at low temperatures. Another reason could be that the water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. Finally, the steam generator might contain too much scale, so clean the boiler as described in the manual.
What to do if my Bosch Sensixx B22L Iron is not heating up?
If your Bosch Iron is not heating up, it could be due to the main power button not being switched on or the temperature being set too low. Ensure the main power button is set to the “I” position (illuminated in red) and adjust the temperature to the desired position.
How to fix a Bosch Sensixx B22L Iron that does not heat up?
If your Bosch Iron does not heat up, first check that the main power switch is set to the “I” position. Also, ensure that the temperature is set to the desired position and not too low.
General| Iron power | 800 W |
|---|---|
| Boiler power | 1500 W |
| Product color | Cherry (fruit), White |
| Soleplate type | - |
| Water tank capacity | 1.3 L |
| Maximum steam pressure | 4.5 bar |
| Vertical steam function | Yes |
| Continuous steam performance | 110 g/min |
| Cord length | 1.9 m |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 250 mm |
|---|---|
| Width | 225 mm |
| Height | 375 mm |
| Weight | 4490 g |
