11
B O S C H
* Model dependent
8. Energy saving “eco”
button
Push the energy saving button (6).
If the energy saving setting is selected, you
can save up to 30% of the energy and 40%
of the water consumption (*), and still
achieve good results when ironing most of
your garments.
It is advisable to use the normal energy
setting only for thick and very wrinkled
fabrics.
(*) In comparison to the maximum setting.
9. Auto shut-off
If during ironing, the steam release button
(14 or 15*) on the iron handle is not pressed
for a certain length of time (8 minutes), the
steam station will automatically switch off.
The illuminated ring around the programme
selector (9) will ash when auto shut-off has
been activated. Three beeps will be heard
at the same time.
To switch the steam station back on, press
the steam release button again.
TextileProtect
10. Fabric protection
soleplate cover
The fabric-protection soleplate cover (18*)
is used for steam-ironing delicate garments
at maximum temperature without damaging
them. Use of the soleplate cover also does
away with the need for a cloth to prevent
shine on dark materials.
It is advisable to rst iron a small section on
the inside of the garment to see if it is
suitable.
To attach the soleplate cover to the iron,
place the tip of the iron into the end of the
soleplate cover and pull the elastic strap
over the lower rear of the iron until it ts
tightly. To release the soleplate cover, pull
the elastic strap and remove the iron.
The fabric-protection soleplate cover may
be purchased from our customer service or
from our website.
Accessory code
(After-sales)
Name of accessory
(online shop)
571510 TDZ2045
To Next Page
Loading...
