16
B O S C H
* Model dependent
13. Storing the appliance
1. Set the power button to the “O” position
and disconnect the mains cable.
2. Always allow the appliance to cool down
before storing it.
3. Place the iron on the iron pad (2),
standing on the soleplate, and x it by
inserting the tip of the iron into the front
slot and moving the lock system (3)
against the heel of the iron.
2
4. Empty the water tank, store the mains
cable on the cord storage facility and the
steam hose in the storage xing. Do not
wrap the cords too tight.
5. Hold the iron´s handle when moving the
appliance.
Tips to help you save
energy
Steam production consumes the most
energy. To help minimise the energy used,
follow the advice below:
• Start by ironing the fabrics that require
the lowest ironing temperature. Check the
recommended ironing temperature on the
label on the garment.
• Try to iron the fabrics while they are still
damp and reduce the steam setting.
Steam will be generated from the fabrics
rather than the iron.
• If you tumble dry your fabrics before
ironing them, set the tumble drier on the
‘iron dry’ programme.
To Next Page
Loading...
