13
B O S C H
* Model dependent
5 Shake the base unit for a few moments
and then empty it completely over a sink
or bucket. To obtain the best result, we
recommend that this operation is
performed twice.
Important: before re-closing, make sure
no water remains in the boiler.
x2
6 Replace and tighten up the scale collector.
1
2
11.2. Rinsing the iron steam
chamber
1 Fill the tank with tap water.
2 Plug in the mains cable and set the
power button (10) to the “I” position.
3 By turning the programme selector (9),
choose “
Calc’nClean
” decalcication
programme. The indicator light (7) will
start ashing.
To Next Page
Loading...
