14
B O S C H
* Model dependent
4 Wait until the indicator light (8) stops
ashing and remains lit continuously.
Two beeps will be heard at the same
time.
5 Hold the iron over the sink or a container
to collect the water.
6 Press the steam release button (14) and
gently shake the iron. Boiling water and
steam will be released, carrying scale
and/or deposits that might be inside.
After approximately one minute, the
“
Calc
” automatic clean warning indicator
light (4) will go off.
Keep on shaking the iron gently for ve
minutes while the steam release button
is pressed, so that water and steam
clean the chamber completely.
7 Without pressing the steam release
button (14), turn the programme selector
(9) and choose “Linen / max”
programme. The water in the steam
chamber will start evaporating.
8 Wait until all the water inside the
chamber has been evaporated. Then,
you can set the power button (10) to the
“O” position.
1’
To Next Page
Loading...
