EasyManua.ls Logo

Bosch SM SERIES - Indications on the Display

Bosch SM SERIES
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting NL
Faults Cause Solution
There are detergent
residues in the detergent
dispenser or in the tablet
dispenser.
The spray arms were
blocked by crockery,
causing the dishes
Make sure the spray arms are not
locked and free to rotate.
detergent could not be
rinsed away.
Dishwasher detergent dispenser laundry
Only put the detergent in
a dry detergent dispenser.damp when filling the
detergent.
Abnormal foaming
present.
There is hand
dishwashing liquid in the
rinse aid reservoir.
Fill rinse aid directly into the
reservoir.
"Fill rinse aid",
Page 31
Rinse aid has been
spilled.
Remove the rinse aid with
a cloth.
Used detergent or
cleaning product
produces too much foam.
Use a different brand of dishwasher
resourse.
Display instructions
Faults Cause Solution
Indication of softening salt with- No softening-
salt.
Fill softening salt Page 29
Bee.
fill is lit.
Sensor does not recognize
softening salt tablets.
Do not use softening salt
bleed.
Indication of softening salt with- Water softening is off
switched.
Set water softening
Page 29filling does not light up.
Rinse aid refill
indicator lights up.
Rinse aid is missing. 1. Fill the rinse aid
Page 31 Bee.
2. Set the amount of rinse aid.
Rinse aid refill
indicator is not lit.
Water softening is
switched off.
" Amount of rinse aid
set", page 32
Display flashes. Appliance door is not
completely closed.
Close the appliance door.
s Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
53

Table of Contents

Other manuals for Bosch SM SERIES

Related product manuals