Bosch SMU4ECS10E - Cutlery Drawer; 9 Before First Use; Initial; Commissioning

usede
1.Push the lever forward and fold
down the folding spikes
.
G9
use
Before the first
use
use
1
9.1 Carry out initial
commissioning
2
When using the device for the first
time or after restoring the factory
settings, you must make settings.
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
2.To use the folding spikes again,
fold them up.
aThe folding spines click audibly
a.
Requirement:The device is set up and
connected. → page 12
8.5 Cutlery drawer
1.Pour in special salt. → Page 27
2.Fill in rinse aid. → Page 28
3.Turn on a device. → Page 35
Put cutlery in the cutlery drawer.
4.Set the softening system.
→ Page 26
5.Adjust the amount of rinse aid added.
→ Page 29
6.Fill in the cleaner
→ Page 30 .
7.Start the program with the highest
cleaning temperature without
dishes.
We recommend operating the
device without dishes before first
use due to possible water stains and
other residues.
Place cutlery with the pointed and
sharp side facing down.
Tip:These settings and other basic
settings → Page 37 you can change it
again at any time.
25