Bosch SMU4ECS10E - Remote Start; Data Protection

Home Connectde
2.Start the Home Connect app and
set up access for Home Connect.
requirements
¡The device is connected to your WiFi
Home network connected. ¡The device is
connected to the Home Con-
nect app connected.
¡In the basic settings
→ Page 39 This function is set to
"rc1".
¡A program is selected.
The Home Connect app guides you
through the entire registration
process.
Set up Home Connect
requirements
¡The Home Connect app is open
set up on the mobile device.
¡The device has one at the place of installation
Reception to the WLAN home
network (Wi-Fi).
¡The device door is closed.
▶ press.
When you open the device door, the
function is automatically
deactivated.
abutton shines.
Tip:To deactivate the function, press.
1.Open the Home Connect app and
scan the following QR code.
16.3 Privacy
Please note the information on data
protection.
When your device is connected to a
home network connected to the
Internet for the first time, your device
transmits the following categories of
data to the
Home Connect server
(First registration):
¡Unique device identifier (best
from device keys and the MAC
address of the installed Wi-Fi
communication module). ¡Wi-Fi
communication security certificate
communication module (for
information technology security of
the connection).
¡The current software version and
Hardware version of your home
appliance. ¡Status of any previous
previous reset to factory settings.
2.Follow the instructions in the Home
Connect app.
16.2 Remote Launch
You can start the device with your
mobile device using the Home
Connect app.
Tip:If you go to the basic settings →
Page 39 If you set this function to "rc2",
the function is permanently activated
and you can start your device at any
time with a mobile device.
Enable remote start
This initial registration prepares you
to use the Home Connect
functionalities and is only required at
the time you want to use Home
Connect functionalities for the first
time.
If you have set “rc1” in the basic
settings for this function, activate the
function on your device.
41