EasyManua.ls Logo

Bosch SMU4ECS10E - 18 Troubleshooting

Bosch SMU4ECS10E
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
deTroubleshooting
18 Troubleshooting
You can fix minor problems with your device yourself. Use the troubleshooting
information before contacting customer service. This way you avoid unnecessary
costs.
Tip:Further information and explanations for troubleshooting can be found
online by scanning the QR code in the table of contents and on our website
www.bosch-home.com.
WARNING
Danger of electric shock!
Improper repairs are dangerous.
Only trained specialist personnel may carry out repairs on the device.
Only original spare parts may be used to repair the device.
If the mains connection cable of this device is damaged, it must be replaced
with a special connection cable, which is available from the manufacturer or
its customer service.
Disturbance Cause and troubleshooting
E:30-00 lights up in the
Change.
Water protection system is activated.
1.Close the faucet.
2.Call customer service
Page 54
.
E:31-00 lights up
Change.
Water protection system is activated.
1.Close the faucet.
2.Call customer service
Page 54
.
E:32-00 lights up
Change or display
for water inlet
shines.
Inlet hose is kinked.
Lay the inlet hose without kinks.
Faucet is closed.
Open the faucet.
Faucet is jammed or calcified.
Open the faucet.
The flow rate must be at least 10 l/min when the
water inlet is open.
Screens in the water connection of the inlet or
Aqua-Stop hose are clogged.
1.Turn off the device.
2.Unplug the power cord.
3.Turn off the tap.
4.Unscrew the water connection.
46

Table of Contents

Related product manuals