Troubleshootingde
Disturbance Cause and troubleshooting
5.Take the strainer out of the inlet hoseE:32-00 lights up
Change or display
for water inlet
shines.
6.Clean the sieve.
7.Place the strainer in the inlet hose.
8th.Screw on the water connection.
9.Check the water connection for leaks.
10.Connect the power supply.
11.Turn on the device.
E:34-00 lights up in the
Change.
Water constantly flows into the device.
1.Close the faucet.
2.Call customer service →
Page 54
.
E:61-02 lights up in the
Change.
No device error. Wastewater pump is blocked or the
wastewater pump cover is loose.
1.Clean the wastewater pump.
→
"Cleaning the wastewater pump", page 52
2.Snap the waste water pump cover into place
correctly.
→
"Cleaning the wastewater pump", page 52
47
To Next Page
Loading...
