deTransport, storage and disposal
18.1 Clean the waste water
pump
8th.Insert the pump cover and press
down.
Coarse food residue or foreign objects
can block the wastewater pump. As
soon as the flushing water no longer
drains properly, you have to clean the
wastewater pump.
2
1
WARNING
Risk of injury!
Sharp and pointed objects such as
broken glass can block the
wastewater pump and cause injury.
▶ Carefully remove foreign bodies.
aThe pump cover clicks into place
cash.
9.Install the sieve system.
1.Disconnect the device from the power supply.
10.Insert the lower and upper racks.
2.Remove the upper and lower dish
racks.
3.Remove the sieve system.
4.Scoop out available water.
19 transport,
Storage and disposal
If necessary, use a sponge.
5.Lever out the pump cover using a
spoon and grab it by the bar.
19.1 Dismantle the device
1.Disconnect the device from the power supply.
2.Turn off the tap.
3.Disconnect the waste water connection.
4.Disconnect the drinking water connection.
5.If available, loosen the fastening
screws to the furniture parts.
6.If present, dismantle the base
board.
7.Carefully pull out the device and
retighten the hose.
6.Lift the pump cover diagonally
inwards and remove it.
aNow you can there
reach by hand
s impeller with
.
7.Leftover food and Fr
area of the wing
emd body in
remove ads.
52
To Next Page
Loading...
