Cleaning and carede
7.Insert the sieve system into the
device and turn the coarse sieve
clockwise.
2.Pull the lower spray arm upwards.
ā Note that the arrow marks are
opposite each other.
3.Check the outlet nozzles of the spray
arms for blockages under running
water and remove any foreign
bodies.
4.Insert the lower spray arm. aThe
spray arm audibly clicks into place.
17.6 Clean spray arms
Limescale and impurities from the
rinsing water can block the spray arm
nozzles and bearings. Clean the spray
arms regularly.
1.Unscrew the upper spray arm and
pull it down.
5.Insert the upper spray arm and
screw tight.
1
2
45
To Next Page
Loading...
