Basic settingsde
basic
position
Display text
Cn0
Selection
Cn0 - Cn1
Description
Wi-Fi Turn wireless network
connection on or off.
The "Cn0" level turns off the
wireless network
connection.
This basic setting is only
available after you have
connected the device to the
Connected to the Home
Connect app.
→
"Home Connect",
page 40
Remote start rc1 rc0 - rc2
→
"Remote Start ", page
41
enable or disable.
The following settings are
possible:
¡With the setting "rc0"
the function is permanently
deactivated.
¡With the setting "rc1"
The function can be
selected using the button.
→
"Activate Remote Start",
page 41
¡With the setting “rc2”
the function is permanently
activated.
This basic setting is only
available after you have
connected the device to the
Connected to the Home
Connect app.
→
"Home Connect",
page 40
Factory setting re Start with Reset changed settings to
factory defaults. The settings
must be made for initial
commissioning.
YES
Confirm with
1Factory setting (may vary depending on device type)
39
To Next Page
Loading...
