Cleaning and carede
phase
1
distance from
fat and lime
cleanser placement
Liquid machine
care products or powder
deformed machine
called descaler.
device interior,
e.g. B. Bottle placed
in the cutlery basket
hangs or powder in
the interior.
2 food residues
and deposits
Machine cleaner Cleaner chamber
For optimal cleaning performance, the
program doses the cleaners separately
in the corresponding cleaning phase.
This requires the correct placement of
the cleaners.
If the machine care indicator on the
control panel lights up or the display
advises you to do so, carry out the
machine care without dishes. After you
have carried out the machine
maintenance, the display goes out. If
your device does not have a reminder
function, we recommend carrying out
machine maintenance every 2 months.
¡In order to achieve optimal cleaning performance
To maintain safety, pay attention to the
correct placement of the cleaners.
¡Observe the safety instructions
on the packaging of machine care
products and machine cleaners.
1.Remove any coarse dirt in the
interior with a damp cloth.
2.Clean the sieves.
3.Place the machine care product
inside the device.
Only use machine care products
that are specifically designed for
dishwashers.
Carry out machine maintenance
Hints
¡Run the machine program
Carry out cleaning without the dishes
being put away.
¡Use only specifically for
Machine care products and machine
cleaners suitable for dishwashers.
¡Make sure that there are no
aluminum parts, e.g. B. grease filters from
extractor hoods or aluminum pots, are
located in the washing compartment of
the device.
¡If you care for the machine
If you have not carried out 3 rinse
cycles, the machine care display will
automatically go out.
4.Pour the machine cleaner into the
cleaner chamber until it is
completely full.
Do not add machine cleaner to the
interior of the device.
5. press.
press.6.
aMachine maintenance is carried out
leads.
aWhen the program is finished,
the machine care display goes out.
43
To Next Page
Loading...
