usageNL
2.To use the foldable plate supports
again, fold them up.
Required:The device is set up and
connected. →
Page 12
1.Fill with softening salt.
→
Page 24
aThe foldable plate supports
click audibly into place.
2.Fill with rinse aid.
→
Page 26
8.5 Cutlery tray
3.Switch on device.
→
Page 32
Arrange the cutlery in the cutlery drawer.
4.Set water softening.
→
Page 24
5.Set amount of rinse aid. →
Page 27
6.Fill the detergent
→
Page 27
.
7.Start the program with the highest
cleaning temperature without
dishes.
We recommend that you use the
appliance without dishes before
using it for the first time due to
possible water stains and other
residues.
Place the cutlery with the pointed
and sharp side down.
Tip:You can change these settings
and other basic settings →
Page 35
change at any time.
g9 Before first use
use
usage
9.1 Commissioning for the first
time
10 Softening system
Hard, calcareous water leaves
limescale residues on the dishes and
the rinse aid container and can clog
parts of the appliance. For good
dishwashing results, you can soften
water with the water softener and
softener salt. To prevent damage to
the appliance, water with a hardness
of more than 7 °dH must be softened.
When using the device for the first
time or resetting it to factory
settings, you must make settings.
Tip:Connect your device to a mobile
end device. You can easily make all
settings via the Home Connect app.
10.1 Overview of the water hardness settings
Here you will find an overview
You can determine the
water hardness with a w
ight of the adjustable water hardness values. obtain this
from your local water supply company or water hardness
tester.
23
To Next Page
Loading...
