NLHome Connect
2.Follow the instructions in the
Home Connect app.
data categories to the Home
Connect server (initial registration):
¡Unambiguous identification of the device
ready (consisting of device keys
and the MAC address of the built-
in
Wi-Fi communication module). ¡
Security certificate of the Wi-Fi
communication module (for the
information-technical security of
the connection).
¡The current software and hardware
version of your home appliance. ¡
Status of any previous
reset to factory settings.
16.2 Remote Start
You can start the appliance with your
mobile device via the Home Connect
app.
Tip:If you are in Basic Settings
→
Page 38
If you set this function to
"rc2", the function is permanently
activated and you can start the device
at any time with a mobile device.
Activate Remote Start
If you have set "rc1" in the basic
settings of this function, activate the
function on your device.
The use of the Home Connect
functionalities is prepared during the
first registration. This registration
should only be carried out when you
want to use the Home Connect
functionalities for the first time.
Requirements
¡The device is connected to the WLAN
home network connected.
¡The appliance is equipped with the Home Con-
nect app connected.
¡In the Basic Settings
→
Page 38
this function is set to
"rc1".
¡A program has been selected.
Remark:Please note that the Home
Connect functionalities can only be
used in combination with the Home
Connect app. Information on data
protection can be called up in the
Home Connect app.
▶ impressions.
When you open the appliance door, the
function is automatically deactivated.
aKey is illuminated.
Tip:To deactivate the function on
to press.
16.3 Personal Data Protection
Please observe the instructions
regarding the protection of personal
data.
When your device connects to a home
network connected to the internet for
the first time, it displays the following
40
To Next Page
Loading...
