NLService
2. impressions.
aThe program is saved
and the device turns off.
3.Press to continue the program.
4.Close the appliance door.
14.7 Cancel program
To end a program early or to change
a program that has started, you must
cancel the active program.
1.Open the appliance door.
2.Approx. press for 4
seconds.
3.Close the appliance door.
aThe program is aborted
and is closed after approx. 1 minute.
14.8 Switch off the device
1.The instructions for safe use →
Page 10
consider.
2.Press.
Tip:If you touch during the wash cycle
button, the running program is
interrupted. When you switch on the
device, the program continues
automatically.
34