NLCleaning and maintenance
7.Place the sieve system in the
appliance and turn the coarse
sieve clockwise.
2.Pull the lower spray arm upwards to
remove it.
‒ Verify that the arrow marks are
aligned.
3.Check the spray arm outlets for
blockages under running water and
remove any foreign objects.
17.6 Cleaning the spray arms
4.Install the lower spray arm.
Limescale and impurities in the
washing water can block the nozzles
and bearings of the spray arms. Clean
the spray arms regularly.
1.Unscrew the upper spray arm and
pull it downwards
.
aThe spray arm engages audibly.
5.Fit the upper spray arm and screw
it tight.
1
2
44
To Next Page
Loading...
