Bosch SMV6YCX00E - Change Basic Settings

NLBasic settings
Basic setting
Remote Start
display
text
Choice Description
rc1 rc0 - rc2
→ "Remote Start", page 40
activate or deactivate.
The following settings are
possible:
¡With the setting "rc0", the
function permanently
deactivated.
¡With the setting "rc1" you can
the function is selected
via the button.
→ "Activating Remote
Start", page 40
¡With the setting "rc2", the
function permanently
activated.
This basic setting is only
available after you have
connected the appliance to
the Home Connect app.
→ "Home Connect",
page 39
Factory setting re Start with Reset changed settings to
the factory condition.
The settings for the first
commissioning must be
specified.
YES
To confirm
of
1Factory setting (may differ depending on device type)
15.2 Change basic settings
aappears on the display
to give.
displayed
4.Just as often
until the display shows the desired
setting.
to press
Tip:Connect your device to a mobile
end device. You can easily make all
settings via the Home Connect app.
5.Just as often
the display indicates the desired
value.
press until
1.Open the appliance door.
2.Press.
You can change multiple settings.
3.Approx. up for 3 seconds
to access basic settings.
Busy-
6.To save the settings, press for
approx. 3 seconds to press.
aThe display shows Hxx.
7.Close the appliance door.
38