NLTransport, storage and disposal
18.1 Cleaning the drain pump
8.Fit the pump cover and press
down .
Large food scraps or objects can block
the drain pump. As soon as the
dishwater no longer drains properly,
you must clean the drain pump.
2
1
WARNING
Risk of injury!
Sharp and pointed objects such as
shards of glass can block the drain
pump and cause injury.
▶ Carefully remove foreign objects.
aThe pump cover clicks audibly
fixed.
9.Assemble the sieve system.
1.Unplug the device from the power
outlet.
10.Insert the lower and upper
baskets.
2.Remove the upper and lower
baskets.
3.Remove the strainer system.
4.Scoop out the existing water.
19 Transporting,
hit and throw
If necessary, use a sponge for
this.
5.Lift up the pump cover with a spoon
and hold it by the bracket.
19.1 Disassemble the device
1.Unplug the device from the power
outlet.
2.Turn off the water tap.
3.Loosen the drain water connection.
4.Loosen the drinking water
connection.
5.If present, loosen the fixing screws
of the furniture parts.
6.If present, remove the plinth.
6.Lift the pump cover at an angle
inwards and remove it.
7.Carefully pull the device forward,
pulling the hose along with it.
aNow you can turn the impeller by hand
reaches.
7.Food scraps and
spills at the pump
goods.
emde objects
aier remove-
52
To Next Page
Loading...
