Bosch SOLUTION 3000 Quick Reference Guide

Notice!
The Solution 2000 control panel does not support RADION keyfobs.
Set the Number of Days until the First Test Report
1. Enter the Installer Code, followed by [1] and the [#] key.
2. Enter the Number of Days (0 to 15) until the first Test Report is sent, followed by the [#]
key.
Change Domestic Telephone Numbers
Set up receiver transmission format as Domestic.
1. Enter the Installer Code or Master Code, followed by [2] and the [#] key.
2. Enter the sequence number of the telephone number, followed by the [#] key. For
example, Telephone Number 1 is [1] [#], Telephone Number 2 is [2] [#], etc.
3. Enter the digits for the telephone number, followed by the [#] key.
If there is more than one telephone number, repeat Step 1 to Step 3.
Change the Telco Arm/Disarm Sequence
Telco Arm Sequency (Call Forward On)
1. Enter the Installer Code or Master Code followed by [3] and the [#] key.
2. Press [1] followed by the [#] key.
3. Enter the Call Forward On sequence.
4. Press the [#] key to exit.
Telco Disarm Sequency (Call Forward Off)
1. Enter the Installer Code or Master Code followed by [3] and the [#] key.
2. Press [2] followed by the [#] key.
3. Enter the Call Forward Off sequence.
4. Press the [#] key to exit.
Set STAY Mode 2 Bypass Zones
1. Enter the Installer Code or Master Code, followed by [4] and the [#] key.
2. Enter the Zone Number you want the system to automatically isolate, followed by the [*]
key. Repeat if more than one zone must be automatically isolated when armed in STAY
Mode 2.
3. Press the [#] key to exit.
Report Monitor Mode (Toggle On/Off)
To turn Report Monitor Mode on:
1. Enter the Installer Code, followed by [6] and the [#] key. Three beeps sound.
2. Press and hold the [9] key until two beeps are heard to send a test report.
To Turn Report Monitor Mode off:
Enter the Installer Code, followed by [6] and the [#] key. Two beeps sound.
Zone LED for
Receiver 1
Zone LED for
Receiver 2
Report Event
1 9 Telephone Line Seized
2 10 Dialing Telephone Number / Network Connect
3.4
3.5
3.6
3.7
3.8
16 en | Operating Commands Control Panel
2015.06 | 03 | F.01U.298.027 Quick Reference Guide Bosch Security Systems, Inc.

Bosch SOLUTION 3000 Specifications

General

Brand	Bosch
Model	SOLUTION 3000
Category	Control Panel
Language	English