Bosch Solution 880 CC408 - Programming Parameters: Zone Configuration Basics; Zone Default Programming

CC408 | Quick Reference Guide | 3. Programming Parameters EN | 11
Bosch Security Systems | 6/04 | 4998152468B
3.4.1 continued
Location
185 to 264
Location Default*
RF User #15 255 to 258 15
Authority Level* 259 2
RF User #16 260 to 263 15
Authority Level* 264 2
* Refer to Section 3.4.2 User Code Authority Levels for
Authority Level descriptions.
3.4.2 User Code Authority Levels
Authority
Level
Description
0 Arm/disarm
1 Arm only
2 Arm/disarm and open/close reports
3 Arm only and close reports
4 Arm/disarm and code required to isolate
6 Arm/disarm and open/close reports and
code required to isolate
8 Master code and arm/disarm
10 Master code and arm/disarm and
open/close reports
12 Master code and arm/disarm and code
required to isolate
14 Master code and arm/disarm and code
required to isolate and open/close reports
3.5 Day Alarm Zones
Location
265
Default
0
1 Zone 1
2 Zone 2
4 Zone 3
8 Zone 4
3.6 EOL Resistor Value
Location
266
0 No EOL
1 1K
2 1K5
3 2K2
4 3K3
5 3K9
6 4K7
7 5K6
8 6K8
9 10K
10 12K
11 22K
12 Reserved
13 Reserved
14 Reserved
15 Split EOL (3K3/6K8)
Eight burglary zones
3.7 Zone Default Programming
3.7.1 Zone Defaults
Location
267 to 322
Location Default
Zone #01 (Default = Delay 1)
Zone Type 267 2
Zone Pulse Count 268 0
Zone Pulse Count Time 269 0
Zone Option 1 270 1
Zone Option 2 271 14
Report Code 272 1
Dialler Options 273 1
Zone #02 (Default = Handover)
Zone Type 274 1
Zone Pulse Count 275 0
Zone Pulse Count Time 276 0
Zone Option 1 277 1
Zone Option 2 278 14
Report Code 279 1
Dialler Options 280 1
Zone #03 (Default = Handover)
Zone Type 281 1
Zone Pulse Count 282 0
Zone Pulse Count Time 283 0
Zone Option 1 284 1
Zone Option 2 285 14
Report Code 286 1
Dialler Options 287 1
Zone #04 (Default = Handover)
Zone Type 288 1
Zone Pulse Count 289 0
Zone Pulse Count Time 290 0
Zone Option 1 291 1
Zone Option 2 292 14
Report Code 293 1
Dialler Options 294 1
Zone #05 (Default = Instant)
Zone Type 295 0
Zone Pulse Count 296 0
Zone Pulse Count Time 297 0
Zone Option 1 298 1
Zone Option 2 299 14
Report Code 300 1
Dialler Options 301 1
Zone #06 (Default = Instant)
Zone Type 302 0
Zone Pulse Count 303 0
Zone Pulse Count Time 304 0
Zone Option 1 305 1
Zone Option 2 306 14
Report Code 307 1
Dialler Options 308 1