To Next PageTo Next Page
Need help?Do you have a question about the Bosch TC10 and is the answer not in the manual?
General| Amperage | 15 A |
|---|---|
| Power Input | 120 V |
| Blade Diameter | 10 inch |
| Arbor Size | 5/8 inch |
| Max. Cutting Depth at 90° | 3-1/8 inch |
| Max. Cutting Depth at 45° | 2-1/4 inch |
| No Load Speed | 5000 RPM |
| Saw Blade Bore | 5/8 inch |
Essential safety practices for operating benchtop tools, covering work area, personal, and electrical safety.
Specific safety guidelines for tile saw operation, including electrical, handling, and tool usage precautions.
Instructions on safely connecting the tool to a power source, emphasizing proper grounding and outlet compatibility.
How to adjust the cutting depth of the saw blade using the designated control knobs for precise cuts.
Procedure for setting the saw head to specific bevel angles (0°, 22.5°, 45°) for angled cuts.
Instructions for testing the Ground Fault Circuit Interrupter (GFCI) module before each use to ensure safety.
Step-by-step guide for performing straight cuts on tiles using the saw, including proper feed technique.
