Bosch TC10 - Assembly

)<>/197<5/<263197<5=<B3<BA
(= @32C13 B63 @7A9 =4 7<8C@G
<3D3@ 1=<<31B >:C5 B= >=E3@
A=C@13=CB:3BC<B7:/::/AA3;0:GAB3>A/@31=;
>:3B3/<2C<B7:G=C6/D3@3/2/<2C<23@AB==2
B633<B7@3=E<3@LA;/<C/:
Model TC10 Tile Saw is shipped complete in one
box.
Separate all parts from packing materials and
check each one with the “Table of Loose Parts” to
make sure all items are accounted for before dis-
carding any packing material.
4/<G>/@BA/@3;7AA7<52=<=B
/BB3;>B B= /AA3;0:3 B63 A/E
>:C57<>=E3@1=@2=@BC@<B63AE7B16=<C<B7:
B63 ;7AA7<5 >/@BA /@3 =0B/7<32 /<2 /@3 7<
AB/::321=@@31B:G
==A3$/@BA
B3;$/@B"/;3%BG
A Universal Guide 1
B Water Pump 1
C Saw Blade 1
D Extension Table 1
E Extension Water Trays
(Rear, Side A & B) (Page 10) 3
F Bolt 4
G Bolt Cover 4
H Manual (Page 10) 1
I Frame Assembly & Water Tray (Page 10) 1
J Motor/ Support Arm Assembly (Page 10) 1
K Nut Wrench (Page 11) 1
L Hex Wrench (Page 11) 1
M Sliding Table (Page 11 1
AA3;0:G
3BB7<5B=<=E-=C@+3B(7:3'B=<3'/E
!=B=@ – Powers the tile saw.
3D3:28CAB;3<B<=0 – To tilt the head for
making bevel cuts, 22.5° and 45°, and adjusting
back to 0°.
3>B628CAB;3<B /<2:3 – For raising or
lowering the saw unit.
3>B628CAB;3<B =19<=0 – Turn to unlock
head for making plunge cuts or setting depth of
cut.
3>B6'B=>28CAB;3<B<=0 – Sets stop for
lowest cut position.
+=@9(/0:33<13 – Support tile/stone during
cut, also features scale for quick reference and
repetitive cuts.
!
WARNING
!
WARNING
-9-






BM 2610019162 10-11:BM 2610019162 10-11.qxp 10/20/11 8:59 AM Page 9