VOT-320 Configuration using a Web browser | en 53
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09
5.23 Advanced Mode: Recording Status
Certain details on the recording status are displayed here for information purposes. You
cannot change any of these settings.
5.24 Advanced Mode: Alarm Connections
You can select how the VOT-320 responds to an alarm. In the event of an alarm, the camera
can automatically connect to a pre-defined IP address. You can enter up to ten IP addresses to
which the VOT-320 will connect in sequence in the event of an alarm, until a connection is
made.
To Next Page
Loading...
