Installing and connecting the appliance en
15
Hose and pipe lengths
■ Connection on the right
■ Connection on the left
If the inlet hose for your connection is
too short, you have the option to order
an extension from the after-sales
service. ~ Page 19
Water supply hose
:Warning
Danger of death!
There is a risk of electric shock if live
parts are touched.
Do not immerse the AquaStop safety
valve in water (it contains an electric
valve).
Note: Only operate the washing
machine using cold mains water.
1. Connect the water inlet hose to a tap
(26.4 mm = ¾").
2. Open the water tap carefully,
checking the leak tightness of the
connection points.
Note: The screw connection is
under mains water pressure.
Water drainage
:Warning
Risk of scalding!
When washing at high temperatures,
there is a risk of scalding if you come
into contact with hot detergent solution
(e.g. when draining hot detergent
solution into a washbasin).
Do not reach into the hot detergent
solution.
A 100 cm
B 190 cm
C 140 cm
D max. 100 cm
E 145 cm
F 150 cm
G 90cm