Display en
23
Y Display
Display
Symbol Description Information
E.g. 1:05 Programme duration Expected programme duration in hours and minutes.
e.g. Š kg Recommended load Your appliance displays the maximum load depending
on the selected programme.
N Wash lights up: Status display
à Rinse
0 Spin
“Ÿš End of programme
ª Display of the buttons
selected
lights up: the corresponding button was pressed and
the setting has been activated.
G SpeedPerfect SpeedPerfect activated
F EcoPerfect EcoPerfect activated
~ and Õ Pause and door ~ flashes and Õ lights up: Your appliance is in
pause mode and the door is locked. It is not possible to
add more laundry. Temperature or water level is too
high.
■ Press Start/Nachlegen (Start/Pause) to resume
the programme.
■ If the temperature is high, start the Spülen (Rinse)
programme.
■ If the water level is high, start the Schleudern/
Abpumpen (Spin/Drain)
programme.
Õ Door ■ lights up: The door is locked and cannot be
opened.
■ flashes: The door is not closed properly.
– Remove any trapped laundry
– Otherwise, switch your appliance off and on
again and restart the programme.
~ Pause flashes: Your appliance is in pause mode and the door
is unlocked. More laundry can be added.