Transporting the appliance en
47
2. Clean the filter with a small brush.
3. Connect the hose and check for
leaks.
L Transporting the
appliance
Transporti ng the appliance
Prepare the appliance for
transportation as follows:
1. Turn off the tap.
2. Reduce the water pressure in the
supply hose.~ "Filter in water
supply blocked" on page 46
3. Switch off the appliance.
4. Disconnect the appliance's mains
plug from the power supply.
5. Drain the remaining detergent
solution.~ "Drain and clean the
drain pump" on page 44
6. Remove the hoses.
Fit the transit bolts as follows:
1. Remove the cover caps and keep in
a safe place. Use a screwdriver if
necessary.
To Next Page
Loading...
