en Transporting the appliance
48
2. Insert all 4 transit bolts.
3. Insert the screws and tighten them
with a wrench (WAF 13).
4. Clip the mains cable securely into
the holders.
5. Clip the hose securely into the
holders.
Before switching on the appliance
again:
Notes
■ The transit bolts must be removed.
■ Pour approx. 1 litre of water into
compartment II and start the
Schleudern/Abpumpen (Spin/Drain)
programme.
This will prevent detergent from
flowing straight into the drain during
the next wash.
To Next Page
Loading...
