Cleaning and maintenance en
45
10.Place the drain hose back in the
holder.
11.Carefully unscrew the pump cover.
Note: Residual water may leak out.
12.Clean the inside and the thread on
the pump cover and pump housing.
Note: The impeller in the drain
pump must be able to rotate.
13.Refit the pump cover and screw it on
tightly.
Note: The handle must be in a
vertical position.
14.Place the service flap back on and
lock it into place.
15.Close the service flap.
16.Turn on the tap. Insert the plug and
switch on the appliance.
To Next Page
Loading...
