Concerning this document
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 4 of 85
Hazard symbol Meaning
Danger of cuts
Danger of crushing
Danger from hot surfaces
Danger from strong magnetic field
Danger from non-ionizing radiation
Table 2: Hazard symbols
1.2.3 Structure of the warnings
Warnings in this document have a standardised appearance and a standardised
structure.
Type and source of danger!
Consequences of ignoring the warning.
► Actions to protect from danger.
The following example shows a warning that warns against electric shock due to
live parts. The measure for avoiding the danger is mentioned.
Risk of electric shock due to live parts!
► Disconnect the appliance from the mains at least 60 seconds
before starting the work .
1.2.4 General symbols
The following general symbols are used in this document:
Gen. symbol Meaning
Identification of a special tip (text and/or graphic)
Identification of a key or button
Identification of a material number
Identification of a condition (if ..., then ...)
Identification of a simple tip (only text)
Table 3: General symbols
To Next Page
Loading...
