Design and function
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 9 of 85
3.2 Safety switch
3.2.1 Structure
Fig. 2: Components of the safety switch
1 Float 2 Safety switch
The float (1) is in the base support. The safety switch (2) is situated above the float.
The float and switching contact of the safety switch are mechanically connected to
each other.
3.2.2 Function
If water infiltrates into the base support, the float rises and actuates the safety
switch.
The Aquastop valve is deactivated. The wash liquor is pumped off.
To Next Page
