Concerning this document
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 3 of 85
1.1 Important information
Read and observe chapter 2 "Safety" before performing any work!
1.1.1 Purpose
These repair instructions form the basis for a systematic and safety conscious
procedure for the repair of domestic appliances.
These repair instructions include information about troubleshooting and repair.
1.1.2 Target group
These repair instructions are intended for persons who are familiar with equipment
technology and were instructed by BSH or an authorised body:
• Service technicians for the repair of domestic appliances
• Pre-assemblers in the spare part stockroom when determining required spare
parts
• Call centre employees during order acceptance
1.1.3 Other applicable documents
The following documents include additional relevant repair information:
• General repair instructions
• Error codes and service programs
• Circuit diagrams
• Exploded drawings
• Parts lists
• Repair videos
1.2 Explanation of symbols
1.2.1 Danger levels
The warning levels consist of a symbol and a signal word. The signal word
indicates the severity of the danger.
Warning level Meaning
Non-observance of the warning message will result in death or
serious injuries.
Non-observance of the warning message could result in death
or serious injuries.
Non-observance of the warning message could result in minor
injuries.
Non-observance of the warning message could result in dam-
age to property.
Table 1: Danger levels
1.2.2 Hazard symbols
Hazard symbols are symbolic representations which give an indication of the kind
of danger.
The following hazard symbols are used in this document:
Hazard symbol Meaning
General warning message
Danger from electrical voltage
Risk of explosion
To Next Page
Loading...
