Repairs
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 65 of 85
6.10 Replacing motor
Fig. 29: Attaching/connections of the motor
1 Bolts
Prerequisite:
• Rear panel has been removed.
6.10.1 Removing motor
1. Remove belt.
2. Remove the electrical connection.
3. Remove screws from the motor attachment.
4. Take motor out of the appliance.
6.10.2 Installing motor
► Install motor in reverse sequence.
To Next Page
