Bosch WAT28400 - Removing;installing the inverter module

Repairs
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 83 of 85
6.22 Removing/installing the inverter module
Prerequisite:
• Rear panel has been removed.
6.22.1 Removing the inverter module
1.
2. Remove screws (1).
3. Remove frictional damper.
4.
5. Remove cable strap (2).
6. Loosen fixing elements (3).