Bosch WAT28400 - Removing;installing the power module

Repairs
2017-05-22 / DIS 113_58300000186503_ara_en_c Copyright by BSH Hausgeräte GmbH Page 80 of 85
6.20 Removing/installing the power module
Prerequisite:
• Back panel has been removed.
6.20.1 Removing the power module
1.
2. Release outlet hose (1) from the holders.
3. Remove cable strap (3).
4. Release protective conductor connections (6).
5. Release power cord (5) from the holder.
6. Using a suitable tool, disengage catch element (2).
7. Disengage the catch element (4).
8.
9. Push power module with cover upwards and remove from the inner wall of the
appliance.