NLEnvironmental protection and saving
▶ Do not use strong alcohol-based
cleaning agents.
▶ Do not use hard scouring or
dishwashing sponges.
▶ Clean the device only with water
and a soft, damp cloth.
▶ Remove all detergent residues, spray
mist residues or residues immediately
upon contact with the appliance.
Reduce washing temperature for
lightly and normally soiled laundry.
aAt low temperatures, it consumes
device less energy. For light to
normal soiling, lower
temperatures than those stated on
the care label are also sufficient.
Set the maximum spin speed if the
laundry is to be dried in the appliance
afterwards.
3 Environmental protection and
savings
aDryer laundry shortens the pro-
gramme time during drying and
reduces energy consumption. With
a higher spin speed, the residual
moisture in the laundry decreases
and the spinning sound volume
increases.
3.1 Disposing of the
packaging
The packaging materials are
environmentally friendly and can be
reused.
▶ Dispose of the individual components
separately according to type.
Wash laundry without prewash.
aWashing with prewash extends
program duration and increases
energy and water consumption.
3.2 Energy- and resource-
efficient
The device has automatic load
matching.
If you follow these directions, your
device will use less power and water.
aThe automatic load matching
ming optimally adapts the water
consumption and program duration
to the type of textile and the load
capacity.
Use programs with low temperatures
and longer washing times and use
the maximum load capacity.
3.3 Energy Saving Mode
aThe energy consumption and water
consumption are the most efficient.
If you do not operate the device for a
long time, it automatically switches
to energy-saving mode.
The energy saving mode is exited
when you operate the device again.
Detergent according to the degree of
soiling of the laundry .
aFor a light to normal degree
of contamination, a small amount
of detergent is sufficient. Follow the
detergent manufacturer's dosing
recommendations.
12
To Next Page
Loading...
