Set up and connectNL
3.Remove the mains connection cable from
the holder.
6.Push the 4 cover caps down.
4.Remove the 4 sleeves.
4.5 Connecting device
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶ Do not immerse the electric
Aquastop valve in water.
5.Install the 4 cover caps.
1.Connect the water inlet hose to the
tap (26.4 mm = 3/4").
2.Open the tap carefully and check
that the connections are tight.
Water drainage connection types
The information will help you connect this
appliance to the water outlet.
15
To Next Page
Loading...
