NLHome Connect
6.Enter the network name (SSID) and
password (key) of your home
network in the Home Connect app.
3.As soon as the appliance is
displayed in the Home Connect
app, follow the last steps in the
Home Connect app.
7.Follow the steps in the Home
Connect app to connect the
appliance.
aWhen the display shows "con"
the appliance is connected to the
Home Connect app.
aWhen the display shows "con"
is displayed and lights up
permanently, the device is
connected to the home Wi-Fi
network.
16.4 Activate WiFi on the device
Remark:The energy consumption
increases compared to the values
indicated in the consumption value
tables when Wi-Fi is activated.
8.If the display shows "Err", the device
is not connected to the home WiFi
network.
s Check if the device is within
range of the Wi-Fi network.
s Reconnect the device to the Wi-
Fi network with WPS function.
1.Approx. 3 s press.
2.Set program to position 4.
aThe display shows "Con"
given.
3.Press
displays.
until the display shows "on"
9.Connecting the appliance to the
Home Connect app →
Page 38
.
aWiFi is activated.
16.3 Connecting the appliance
to the Home Connect app
16.5 Deactivate WiFi on the
device
1.Press for at least 3 seconds.
Requirements
sThe device is connected to the
WiFi home network.
sThe Home Connect app is open
and you have signed up.
2.Set program to position 4.
aThe display shows "Con"
given.
3.Press
displays "oFF".
until the display
1.Set the program to level 3.
aWiFi is deactivated.
aThe display shows "App"
given.
Remark:The connection is
automatically re-established when Wi-
Fi is re-enabled.
2.Press .
aThe device is connecting
with the Home Connect app.
16.6 Resetting the device's
network settings
1.Press for at least 3 seconds.
38
To Next Page
Loading...
