ServiceNL
14.11 Loading laundry 14.13 Canceling the drying
program
After the program has started, you
can remove or add laundry
depending on the program status.
1.Press .
aThe device turns off.
2.Turn the device back on.
Required:A program has started.
→
"Starting the program", Page
34
3.To start the cooling process:
select the program My Time
+ Dry .
4.Press .
1.on to press.
The appliance pauses during
washing.
During drying, the appliance checks
whether it is possible to add
laundry.
14.14 Removing the laundry
1.Open the door.
2.Remove the laundry from the
drum.
Remark:If you want to add laundry,
follow the instructions on the
display.
→
"Display", page 22
14.15 Switching off the device
1.Press .
2.Wipe the rubber sleeve dry and
remove any foreign objects.
2.Open the door.
3.Reload or remove the laundry.
4.Close the door.
to press.5.on
14.12 Canceling the washing
program
1.on to press.
2.Open the appliance door.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperature rinse.
– Start the program with a high
water level or select a suitable
program for draining.
→
"Programs", Page 27
3.Leave the appliance door and detergent
drawer open to allow the residual
water to dry out.
3.Remove the laundry
→
"Laundry out
Page 35
hurt.
people",
35
To Next Page
Loading...
