NLTransport, storage and disposal
19.1 Emergency release
5.Let the suds drain.
→
"Cleaning the drain
pump", page 42
unlock door
Required:The drain pump is empty.
→
Page 42
6.Disassemble the hoses.
20.2 Installing transport locks
1. ATTENTION!Running water can
lead to material damage.
▶ Do not open the door if water can
be seen behind the glass.
Secure the device before transport
with the transport locks to avoid
damage.
1.Remove the 4 cover caps using a
screwdriver.
Pull down and release the
emergency release with the aid of a
tool.
aThe door lock is unlocked.
Keep the cover caps.
2.Place the service door and click it into
place.
2.Install the 4 transport locks. Keep
the description
→
"Remove transport locks", page
14
and proceed in reverse order.
3.Close the service door.
20 Transport, on-
hit and drain
20.3 Restarting the device
20.1 Disassemble device
▶ For more information, see
→
"Setting up and
connecting", Page 13
and
→
"Start the wash cycle without
laundry", page 20
.
Remark:You can find more
information in the digital operating
instructions by scanning the QR code
in the table of contents or on
www.bosch-home.com.
1.Close the tap.
2.Water supply hose
3.Switch off the device
empty.
ate out.
device from the4.Remove the plug
from the socket.
56
To Next Page
Loading...
