en Positioning and connecting
16
Installing the appliance below
a high worktop
When installing the appliance below a
high worktop, you can bridge the gap
between the top of it and the worktop by
placing the appliance on taller feet.
Order no.s for sets of taller feet:
WZ 20441, WMZ 20441, Z 7060X1
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 9756,
Z 7080X0
Note: On wooden joist floors, install the
washing machine:
■ In a corner, if possible,
■ On a water-resistant wooden board
(min. 30 mm thick) which is screwed
tightly to the floor.
Installation on a platform with
drawer
Platform order no.: WMZ 20490,
WZ 20490, WZ 20510, WZ 20520
To Next Page
Loading...
