en Positioning and connecting
22
Installing the appliance
1. To make it easier to push in the
appliance's rear feet (a), turn them in
until the appliance is on the runners
(b).
2. Prepare the installation space.
3. Lay the mains cable and the hoses.
Push the appliance in, moving the
mains cable and the hoses with it.
Note: Take care not to trap the
mains cable and the hoses between
the back of the appliance and the
wall.
4. Connect the hoses. ~ Page 19,
~ Page 20
5. The appliance must be standing on
all four feet before it can be put into
operation. Unscrew the rear feet.
PP
!PP
D
E
FP
FP
FP
[
To Next Page
Loading...
