Cleaning and maintenance en
45
Detergent drawer and housing
If the washing machine contains
detergent or fabric softener residues:
1. Pull out the detergent drawer as far
as possible.
2. Press the insert down and fully
remove the drawer.
3. To remove the insert: Push the insert
upwards from below with your finger.
4. Clean the detergent drawer and
insert with water and a brush, then
dry them.
5. Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
6. Clean the inside of the detergent
drawer housing.
7. Push in the detergent drawer.
Note: Leave the detergent drawer open
so that any residual water can
evaporate.
To Next Page
Loading...
Need help?
General
