en Positioning and connecting
28
Transportation
E.g. when moving house
Preparatory work:
1. Turn off the tap.
2. Reduce the water pressure in the
supply hose: ~ Page 48; Cleaning
and maintenance – filter in the water
supply blocked
3. Disconnect the washing machine
from the mains.
4. Drain the remaining water:
~ Page 46; cleaning and
maintenance – the drain pump is
blocked, emergency draining
5. Remove the hoses.
Attach the transport locks:
1. Use a screwdriver to remove the
covers and then keep them in a safe
place.
2. Insert all four sleeves.
The mains cable can be clamped to
the holders.
3. Insert the transport lock bolts and
tighten them with a WAF13 spanner.
Before switching on the appliance
again:
Notes
■ The transport braces must be
removed.
■ Pour approx. 1 litre of water into
compartment II, select the
Drain/Empty programme and start.
This will prevent detergent from
flowing unused into the drain during
the next wash.
To Next Page
Loading...
