en Cleaning and maintenance
46
The drain pump is blocked,
emergency draining
:Warning
Risk of scalding!
The washing water will get very hot
when washing at high temperatures.
You may be scalded if you touch the hot
washing water.
Allow the washing water to cool down.
1. Turn off the tap so that no more
water can flow in and it has to be
drained via the drain pump.
2. Switch off the appliance. Pull out the
mains plug.
3. Remove the toe kick.
4. Take the drain hose out of the
holder.
5. Remove the sealing cap and drain
the water into a suitable container.
6. Put the sealing cap back on and
press down firmly.
7. Place the drain hose back in the
holder.
8. Carefully unscrew the pump cover.
Be aware that any remaining water
may leak out.
9. Clean the inside, the pump cover
thread and the pump housing. The
impeller in the drain pump must be
able to rotate.
To Next Page
Loading...
Need help?
General
