Troubleshootingen
Disturbance Cause and troubleshooting
device works
Not.
Power supply has failed.
▶ Check that the room lights or other devices in the
room are working.
program starts
Not.
Start/Reloadwas not pressed.
▶ PressStart/Reload .
door is not closed.
1.Close the door.
2.Press to start the programStart/ Reload .
Child lock is activated.
▶
→
"Deactivate childproof lock", page 33
Completed inis activated.
▶ check ifCompleted inis activated.
→
"Buttons", page 23
Laundry is stuck in the door.
1.Open the door again.
2.Remove trapped laundry.
3.Close the door.
4.Press to start the programStart/ Reload .
Door cannot be
opened.
– – – – is activated.
▶ Continue the program bySling
gene
→
"Continue program with rinse hold", page 32
orpumpingchoose andStart/Reload to press.
temperature is too high.
▶ Wait for the temperature to drop.
▶
→
"Cancel program", page 32
Water level is too high.
▶ Choose a suitable pumping program.
→
"programs", page 24
Power failure.
▶ Open the door with the emergency release.
→
"Emergency release", page 47
suds will not
pumped out.
Drain pipe or water drain hose is clogged.
▶ Clean the drain pipe and water drain hose.
Drain pipe or water drain hose is kinked or pinched.
41
To Next Page
Loading...
