Bose 500 - Reset the Soundbar

TROUBLESHOOTING
51
|
ENG
TROUBLESHOOTING
RESET THE SOUNDBAR
Factory reset clears all source, volume, network and ADAPTiQ audio calibration
seings from the soundbar and returns it to original factory seings.
1. On the remote, press and hold the Power buon I and Skip forward buon v for
5 seconds until light bar pulses white twice then fades to black.
Skip forward buon
Power buon
The soundbar reboots. When the reset is complete, the light bar glows
solid amber.
2. To restore the soundbar’s network and audio seings:
a. Launch the Bose app on your mobile device and add the soundbar to your
network (see “Existing Bose App Users” on page 18).
b. Run ADAPTiQ audio calibration using the Bose app.