Bose 500 - Check for Sound

55
|
ENG
CHECK FOR SOUND
NOTE: To avoid hearing distorted audio, turn o your TV speakers. Refer to your TV
owner’s guide for more information.
1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source:
a. Power on this source.
b. Select the appropriate TV input.
3. If the soundbar is not powered on, press the Power buon I on the remote.
You hear sound coming from the soundbar.
4. Press the Mute/Unmute buon A.
You don’t hear sound coming from the TV speakers or soundbar.
NOTE: If you don’t hear sound coming from the soundbar or hear sound coming from
your TV speakers, see page 47.
APPENDIX SETUP REFERENCE