Bose F1 812 Service Manual

6
Product Description
Setting Up the System
Using the F1 Model 812 with the F1 Subwoofer
T
he built-in loudspeaker stand is integrated into the rear of the subwoofer. Setting up the F1 Model 812 loudspeaker
with the F1 subwoofer is a simple three-step process:
1. Locate the stand on the back of the F1 subwoofer.
2. Remove the stand and insert it into the F1 subwoofer.
3. Lift the F1 Model 812 loudspeaker and place it on the stand.
The stand provides channels for cable management.
1 2 3
Built-in speaker stand
Using the F1 Model 812 on a Tripod Stand
T
he bottom of the F1 Model 812 loudspeaker includes an adapter for mounting the loudspeaker on a tripod speaker
stand. The adapter fits a 35 mm pole.
Tripod stand adapter
fits a 35 mm pole

Bose F1 812 Specifications

General

Brand	Bose
Model	F1 812
Category	Speakers
Language	English